Wednesday, March 14, 2012

Control Panel Earthing

Most of the Control panel-manufactures used to connect all the panel doors to the Earth bar provided inside the panels. Some clients demand for earthling rear panel covers. Is there any logic behind this demand? It is an added safety to earth the rear covers of panels also. Generally we do not do this as rear covers are screwed permanently and as such while we access the rear covers, the panel would be made dead and hence no danger. The standards and rules say that each touchable metallic parts should be earthed, so the rear cover, even screwed, can be touchable it should be earthed.

6 comments:

  1. I go through your website having good information about the Electrical control panels and we are also having similar products if you want to know more about the Electrical control panels, please visit our website.

    Electrical control panels, Plc control panels, Synchronising panels

    ReplyDelete
  2. Nice Blog. Thanks for sharing this blog. We also Manufacturers of control panel manufacturer Control Panel Manufacturer

    ReplyDelete
  3. Wow. it is really good. keep more like this. Thank you for the sharing about control panel.
    Electrical Control Panel Manufacturers in Chennai
    Power Factor Controller in Chennai

    ReplyDelete

Electrical engineering Community - All Forums